史德卫生院 5390 8460 对接

app.config

@@ -86,6 +86,8 @@
 		<add key="BH-5380CRP" value="PC-202106061449,BH-5380CRP,121,127.0.0.1,5600,GB18030" />
 		<!-- URIT-8400 -->
 		<add key="URIT-8400" value="CHINAMI-7VR1TBO,URIT-8400,121,192.169.13.27,5150,UTF-8" />
-		<add key="CurrentDevice" value="URIT-330"/>
+		<!-- BH-5390 -->
+		<add key="BH-5390" value="PC-202106061449,BH-5390,121,127.0.0.1,5600,GB18030" />
+		<add key="CurrentDevice" value="URIT-8460"/>
 	</appSettings>
 </configuration>

deviceAnalysis.cs

@@ -2662,7 +2662,14 @@ namespace FlyDockTool
                     erm.sampleNo = sampleNo1;
                     erm.testDate = testDate1;
                     erm.chanelNo = "WBC";//项目代号
-                    erm.itemValue = resulteArray[i + 4].Replace("WBC", "").Replace("CELL/uL", "").Trim().Split(' ')[0].Trim(); //项目结果
+                    if (resulteArray[i + 4].Contains("*"))
+                    {
+                        erm.itemValue = resulteArray[i + 4].Replace("*WBC", "").Replace("CELL/uL", "").Trim().Split(' ')[0].Trim(); //项目结果;
+                    }
+                    else
+                    {
+                        erm.itemValue = resulteArray[i + 4].Replace("WBC", "").Replace("CELL/uL", "").Trim().Split(' ')[0].Trim(); //项目结果;
+                    }
                     erm.itemUnit = "";
                     ermList.Add(erm);
                     examResultMode erm1 = new examResultMode();
@@ -2671,7 +2678,15 @@ namespace FlyDockTool
                     erm1.sampleNo = sampleNo1;
                     erm1.testDate = testDate1;
                     erm1.chanelNo = "KET";//项目代号
-                    erm1.itemValue = resulteArray[i + 5].Replace("KET", "").Replace("mmol/L", "").Trim().Split(' ')[0].Trim();
+                    if (resulteArray[i + 5].Contains("*"))
+                    {
+                        erm1.itemValue = resulteArray[i + 5].Replace("*KET", "").Replace("mmol/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                    else
+                    {
+                        erm1.itemValue = resulteArray[i + 5].Replace("KET", "").Replace("mmol/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                   
                     erm1.itemUnit = "";
                     ermList.Add(erm1);
 
@@ -2681,7 +2696,15 @@ namespace FlyDockTool
                     erm2.sampleNo = sampleNo1;
                     erm2.testDate = testDate1;
                     erm2.chanelNo = "NIT";//项目代号
-                    erm2.itemValue = resulteArray[i + 6].Replace("NIT", "").Replace("Neg", "").Trim().Split(' ')[0].Trim();
+                    if (resulteArray[i + 6].Contains("*"))
+                    {
+                        erm2.itemValue = resulteArray[i + 6].Replace("*NIT", "").Replace("Neg", "").Trim().Split(' ')[0].Trim();
+                    }
+                    else
+                    {
+                        erm2.itemValue = resulteArray[i + 6].Replace("NIT", "").Replace("Neg", "").Trim().Split(' ')[0].Trim();
+                    }
+                   
                     erm2.itemUnit = "";
                     ermList.Add(erm2);
 
@@ -2691,7 +2714,15 @@ namespace FlyDockTool
                     erm3.sampleNo = sampleNo1;
                     erm3.testDate = testDate1;
                     erm3.chanelNo = "URO";//项目代号
-                    erm3.itemValue = resulteArray[i + 7].Replace("URO", "").Replace("umol/L", "").Trim().Split(' ')[0].Trim();
+                    if (resulteArray[i + 7].Contains("*"))
+                    {
+                        erm3.itemValue = resulteArray[i + 7].Replace("*URO", "").Replace("umol/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                    else
+                    {
+                        erm3.itemValue = resulteArray[i + 7].Replace("URO", "").Replace("umol/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                  
                     erm3.itemUnit = "";
                     ermList.Add(erm3);
 
@@ -2701,7 +2732,14 @@ namespace FlyDockTool
                     erm4.sampleNo = sampleNo1;
                     erm4.testDate = testDate1;
                     erm4.chanelNo = "BIL";//项目代号
-                    erm4.itemValue = resulteArray[i + 8].Replace("BIL", "").Replace("umol/L", "").Trim().Split(' ')[0].Trim();
+                    if (resulteArray[i + 8].Contains("*"))
+                    {
+                        erm4.itemValue = resulteArray[i + 8].Replace("*BIL", "").Replace("umol/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                    else
+                    {
+                        erm4.itemValue = resulteArray[i + 8].Replace("BIL", "").Replace("umol/L", "").Trim().Split(' ')[0].Trim();
+                    }
                     erm4.itemUnit = "";
                     ermList.Add(erm4);
 
@@ -2712,7 +2750,15 @@ namespace FlyDockTool
                     erm5.sampleNo = sampleNo1;
                     erm5.testDate = testDate1;
                     erm5.chanelNo = "PRO";//项目代号
-                    erm5.itemValue = resulteArray[i + 9].Replace("PRO", "").Replace("g/L", "").Trim().Split(' ')[0].Trim();
+                    if (resulteArray[i + 9].Contains("*"))
+                    {
+                        erm5.itemValue = resulteArray[i + 9].Replace("*PRO", "").Replace("g/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                    else
+                    {
+                        erm5.itemValue = resulteArray[i + 9].Replace("PRO", "").Replace("g/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                   
                     erm5.itemUnit = "";
                     ermList.Add(erm5);
 
@@ -2723,7 +2769,15 @@ namespace FlyDockTool
                     erm6.sampleNo = sampleNo1;
                     erm6.testDate = testDate1;
                     erm6.chanelNo = "GLU";//项目代号
-                    erm6.itemValue = resulteArray[i + 10].Replace("GLU", "").Replace("mmol/L", "").Trim().Split(' ')[0].Trim();
+                    if (resulteArray[i + 10].Contains("*"))
+                    {
+                        erm6.itemValue = resulteArray[i + 10].Replace("*GLU", "").Replace("mmol/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                    else
+                    {
+                        erm6.itemValue = resulteArray[i + 10].Replace("GLU", "").Replace("mmol/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                  
                     erm6.itemUnit = "";
                     ermList.Add(erm6);
 
@@ -2733,7 +2787,15 @@ namespace FlyDockTool
                     erm10.sampleNo = sampleNo1;
                     erm10.testDate = testDate1;
                     erm10.chanelNo = "SG";//项目代号
-                    erm10.itemValue = resulteArray[i + 11].Replace("SG", "").Trim().Split(' ')[0].Trim();
+                    if (resulteArray[i + 11].Contains("*"))
+                    {
+                        erm10.itemValue = resulteArray[i + 11].Replace("*SG", "").Trim().Split(' ')[0].Trim();
+                    }
+                    else
+                    {
+                        erm10.itemValue = resulteArray[i + 11].Replace("SG", "").Trim().Split(' ')[0].Trim();
+                    }
+                   
                     erm10.itemUnit = "";
                     ermList.Add(erm10);
 
@@ -2744,7 +2806,15 @@ namespace FlyDockTool
                     erm7.sampleNo = sampleNo1;
                     erm7.testDate = testDate1;
                     erm7.chanelNo = "BLD";//项目代号
-                    erm7.itemValue = resulteArray[i + 12].Replace("BLD", "").Replace("CELL/uL", "").Trim().Split(' ')[0].Trim();
+                    if (resulteArray[i + 12].Contains("*"))
+                    {
+                        erm7.itemValue = resulteArray[i + 12].Replace("*BLD", "").Replace("CELL/uL", "").Trim().Split(' ')[0].Trim();
+                    }
+                    else
+                    {
+                        erm7.itemValue = resulteArray[i + 12].Replace("BLD", "").Replace("CELL/uL", "").Trim().Split(' ')[0].Trim();
+                    }
+                 
                     erm7.itemUnit = "";
                     ermList.Add(erm7);
 
@@ -2754,7 +2824,15 @@ namespace FlyDockTool
                     erm8.sampleNo = sampleNo1;
                     erm8.testDate = testDate1;
                     erm8.chanelNo = "pH";//项目代号
-                    erm8.itemValue = resulteArray[i + 13].Replace("pH", "").Trim().Split(' ')[0].Trim();
+                    if (resulteArray[i + 13].Contains("*"))
+                    {
+                        erm8.itemValue = resulteArray[i + 13].Replace("*pH", "").Trim().Split(' ')[0].Trim();
+                    }
+                    else
+                    {
+                        erm8.itemValue = resulteArray[i + 13].Replace("pH", "").Trim().Split(' ')[0].Trim();
+                    }
+                   
                     erm8.itemUnit = "";
                     ermList.Add(erm8);
 
@@ -2764,7 +2842,15 @@ namespace FlyDockTool
                     erm9.sampleNo = sampleNo1;
                     erm9.testDate = testDate1;
                     erm9.chanelNo = "Vc";//项目代号
-                    erm9.itemValue = resulteArray[i + 14].Replace("Vc", "").Replace("mmol/L", "").Trim().Split(' ')[0].Trim();
+                    if (resulteArray[i + 14].Contains("*"))
+                    {
+                        erm9.itemValue = resulteArray[i + 14].Replace("*Vc", "").Replace("mmol/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                    else
+                    {
+                        erm9.itemValue = resulteArray[i + 14].Replace("Vc", "").Replace("mmol/L", "").Trim().Split(' ')[0].Trim();
+                    }
+                   
                     erm9.itemUnit = "";
                     ermList.Add(erm9);
 
@@ -3006,6 +3092,44 @@ namespace FlyDockTool
                 }
 
             }
+            if (apiOptions.CurrentDevice == "BH-5390")//BH-5390
+            {
+                string MachineCode = apiOptions.MachineCode;
+                string MachineID = apiOptions.MachineID;
+                deviceDataStr = deviceDataStr.Replace("\r", "").Replace("\n", "");
+                //string[] resulteArray = deviceDataStr.Split('\n');
+                string sampleNo1 = string.Empty;//样本号
+
+                List<examResultMode> ermList = new List<examResultMode>();
+                string[] itemArray = new string[] { "WBC", "LYM%", "MON%", "NEU%", "EOS%", "BASO%", "LYM#", "MON#", "NEU#", "EOS#", "BASO#", "RBC", "HGB", "HCT", "MCV", "MCH", "MCHC", "RDW_SD", "RDW_CV", "PLT", "MPV", "PDW", "PCT", "P_LCR", "P_LCC", "*ALY%", "*LIC%", "*NRBC%" };
+
+                for (int i = 0; i < itemArray.Length; i++)
+                {
+                    string itemStr = string.Empty;
+                    itemStr = @"(" + itemArray[i] + @")^||";
+
+                    string val1 = deviceDataStr.Substring(deviceDataStr.IndexOf("OBR"), 30);
+                    sampleNo1 = val1.Split('|')[3];
+                    string testDate1 = DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss");
+
+                    examResultMode erm1 = new examResultMode();
+                    erm1.machineCode = MachineCode;
+                    erm1.machineID = MachineID;
+                    erm1.sampleNo = sampleNo1;
+                    erm1.testDate = testDate1;
+                    erm1.chanelNo = itemArray[i];//项目代号
+                    erm1.itemValue = GetTestValue(deviceDataStr, itemArray[i]).ToString();//项目结果;
+                    erm1.itemUnit = "";
+                    ermList.Add(erm1);
+                }
+                string jsonStr = JsonConvert.SerializeObject(ermList);
+                //将结果提交到LIS系统
+                baseMsgModel bmm1 = apiOptions.CreateInstance().upLoadExamResult(ermList);
+                if (bmm1.code == 200)
+                    dataOutPutShow("数据提交成功：" + jsonStr, null);
+                else
+                    dataOutPutShow("数据提交失败：" + jsonStr, null);
+            }
             return rerultJson;
         }
 
@@ -3137,6 +3261,43 @@ namespace FlyDockTool
             return val1;
         }
 
+        /// <summary>
+        /// 从HL7消息中获取指定检验项目的值
+        /// </summary>
+        /// <param name="hl7Message">HL7消息字符串</param>
+        /// <param name="testName">检验项目名称（如：WBC、LYM%等）</param>
+        /// <returns>检验项目的值，如果未找到则返回空字符串</returns>
+        public string GetTestValue(string hl7Message, string testName)
+        {
+            try
+            {
+                // 查找包含目标名称的位置
+                int index = hl7Message.IndexOf("^" + testName + "^");
+                if (index == -1)
+                    return string.Empty;
+
+                // 找到后面的竖线位置
+                int startIndex = hl7Message.IndexOf("||", index);
+                if (startIndex == -1)
+                    return string.Empty;
+
+                startIndex += 2; // 跳过竖线
+
+                // 找到下一个竖线位置
+                int endIndex = hl7Message.IndexOf("|", startIndex);
+                if (endIndex == -1)
+                    return string.Empty;
+
+                // 提取值
+                string value = hl7Message.Substring(startIndex, endIndex - startIndex);
+                return value.Trim();
+            }
+            catch (Exception ex)
+            {
+                return string.Empty;
+            }
+        }
+
 
         /// <summary>
         /// 从字符串中 解析出 jiexiBase64 图像
@@ -3668,6 +3829,22 @@ namespace FlyDockTool
                 SerialPortOption.CreateInstance().dataOutPutShow += new EventHandler(onReData);
                 SerialPortOption.CreateInstance().StartDataReadThread();//开启数据接收
             }
+            if (apiOptions.CurrentDevice == "BH-5390")//BH-5390
+            {
+                // 设置IP地址和端口号
+                string tcp_ip = ConfigurationManager.AppSettings[apiOptions.CurrentDevice].Split(',')[3];
+                string tcp_port = ConfigurationManager.AppSettings[apiOptions.CurrentDevice].Split(',')[4];
+                IPAddress ipAddress = IPAddress.Parse(tcp_ip);
+                // IPAddress ipAddress = IPAddress.Any;
+                //// 创建一个监听Socket
+                if (listener == null)
+                {
+                    listener = new Socket(ipAddress.AddressFamily, SocketType.Stream, ProtocolType.Tcp);
+                    listener.Bind(new IPEndPoint(ipAddress, int.Parse(tcp_port)));
+                    listener.Listen(10000);
+                }
+                _tcpResult.Change(0, 10);//开始tcp数据接收，10毫秒频率
+            }
         }
 
         /// <summary>
@@ -3875,6 +4052,13 @@ namespace FlyDockTool
 
                 //_tResult.Change(5000, 5000);// 数据处理：延迟5秒开始  5秒计时
             }
+            if (apiOptions.CurrentDevice == "BH-5390")//BH-5390
+            {
+                string tempData_temp = tempData;
+                tempData = string.Empty;
+                if (!string.IsNullOrWhiteSpace(tempData_temp))
+                    deviceAnalysisOption(tempData_temp);
+            }
             if (apiOptions.CurrentDevice == "URIT-500B")//优利特尿常规URIT-500B
                 _tResult.Change(5000, 5000);// 数据处理：延迟5秒开始  5秒计时
             if (apiOptions.CurrentDevice == "URIT-330")//优利特尿常规URIT-300
@@ -4263,6 +4447,11 @@ namespace FlyDockTool
             {
                 SerialPortOption.CreateInstance().StopDataReadThread();//开启数据接收
             }
+            if (apiOptions.CurrentDevice == "BH-5390")//BH-5390
+            {
+                _tcpResult.Change(-1, 10);//停止tcp数据接收
+                clientSocket.Close();
+            }
         }
 
         ///// <summary>

mainForm.Designer.cs

@@ -200,7 +200,7 @@
             this.MinimizeBox = false;
             this.Name = "mainForm";
             this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
-            this.Text = "福乐云软硬件数据对接工具V1.1(2025041503)";
+            this.Text = "福乐云软硬件数据对接工具V1.1(2025042501)";
             this.FormClosing += new System.Windows.Forms.FormClosingEventHandler(this.mainForm_FormClosing);
             this.Load += new System.EventHandler(this.Form1_Load);
             this.groupBox2.ResumeLayout(false);

mainForm.cs

@@ -33,8 +33,8 @@ namespace FlyDockTool
             apiOptions.MachineID = ConfigurationManager.AppSettings[CurrentDevice].Split(',')[2];
             lb_currentDeviceInfo.Text = CurrentDevice;
             //////测试代码 测试完毕后注释调一下两行代码
-            //string resultDataStr = File.ReadAllText(@"C:\Users\10044\Desktop\尿常规URIT0-330.txt", Encoding.GetEncoding("GB18030"));
+           // string resultDataStr = File.ReadAllText(@"D:\工作\接受数据工具 list\生化URIT-8460.txt", Encoding.GetEncoding("GB18030"));
-            //deviceAnalysis.CreateInstance().deviceAnalysisOption(resultDataStr);
+           // deviceAnalysis.CreateInstance().deviceAnalysisOption(resultDataStr);
             btn_start_or_stop_Click(null,null);//启动数据接收